BINDER C 170 devices are highly accurate temperature control with excellent dynamics and operate the storage tissue culture without the risk of condensation - even at high humidity.
Important characteristics
• Temperature range: room temperature plus 7 °C to 50 °C
• Humidity range: up to 95 % RH
• Auto-sterilization with hot air at 180 °C
• Humidification system with condensation protection
• CO₂ gas-mixing jet with Venturi effect
• CO₂ sensor with infrared technology
• Display with 3-digit, 7-segment LEDs
• Door hinged right or left
• Lockable door handle
• Tightly-sealed inner door made of tempered safety glass
• Seamless, deep-drawn inner stainless steel chamber
• 3 perforated stainless steel shelves
• Units are stackable with stacking adapter
• Troubleshooting system with visual and audible alarms
• Zero-voltage alarm contact
| |
| Model | C 170 |
| Outer dimensions |
| Width net [mm] | 740 |
| Height net [mm] | 870 |
| Depth net [mm] | 715 |
| Wall clearance back [mm] | 100 |
| Wall clearance sidewise [mm] | 50 |
| Inner doors | 1 |
| Unit doors | 1 |
| |
| Internal Dimensions |
| Width [mm] | 560 |
| Height [mm] | 600 |
| Depth [mm] | 500 |
| Interior volume [L] | 168 |
| Net weight of the unit (empty) [kg] | 110 |
| Load per rack [kg] | 10 |
| |
| Performance Data Temperature |
| Temperature range 7 °C above ambient temperature to [°C] | 50 |
| Temperature uniformity at 37 °C [± K] | 0.3 |
| Temperature fluctuation [± K] | 0.1 |
| Recovery time after 30 seconds door open at 37 °C [min] | 6 |
| Recovery time after 30 seconds door open at 5 Vol.-% CO₂ [min] | 5 |
| |
| Performance Data Climate |
| Humidity range [% RH] | 90…95 |
| |
| Gas Data - CO₂-Data |
| CO₂ range | 0…20 Vol.-% CO₂ |
| CO₂ measurement | IR |
| |
| Electrical data |
| Rated Voltage [V] | 230 |
| Power frequency [Hz] | 50/60 |
| Nominal power [kW] | 1.1 |
| Unit fuse [A] | 10 |
| Phase (Nominal voltage) | 1~ |
| |
| |
Currently there is nothing to download
To get information about: «CO₂ incubators with hot air sterilization » contact us by phone (044) 229 15 31 or fill in the form.